特氟龍圓底離心管/ 氟塑料離心管/Teflon*FEP離心管

Nalgene 3114 Oak RidgeHigh-Speed Centrifuge Tubes

基本特點Features:

◆用途與離心速度：可用于高達50,000 XG的冷凍和非冷凍離心機上。

Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges.

◆用途與性能：是高速離心處理腐蝕性化學品的理想選擇，尤其適合用冷凍離心機在50000xg離心速度下萃取氯仿和苯酚。對于所有的酸、堿、溶劑和活潑的化學藥品具有極佳的化學耐受性。Conduct high-speed centrifugation of aggressive chemicals, specifically suited for chloroform and phenol extractions in refrigerated machines up to 50,000 x g.Excellent for chloroform and phenol extractions. Resist any acid, base or solvent, aggressive chemicals.

◆材質：特氟隆管體，特氟隆螺旋蓋。Materials: Teflon* FEP，Tefzel* ETFE Screw Closure.

◆圓底離心管：適合高速離心機。Round bottom to fit high speed rotors.

◆Oak Ridge 離心管：Nalgene Oak Ridge 離心管標配（隨附）無襯墊的聚丙烯螺旋蓋，容易清洗，并能保證在10000 x g 的離心速度下防漏。Comes with polypropylene linerless closures—easy to clean and provides leak proof protection under normal conditions up to 10,000 x g.

◆螺旋蓋：標配普通螺旋蓋，當高速離心時為了確保防漏，部分型號有密封螺旋蓋供選配（貨號DS3131）。

Tefzel ETFE screw caps. Leakproof† Tefzel™ ETFE closures prevent material loss under ordinary use for most spins <10,000 × g.NALGENE Additional sealing cap assemblies (Cat. No. DS3131 series) are available. Optional sealing caps available — DS3131-0020 (for 30mL tube) and DS3131-0024 (for 50mL tube).

◆密封蓋的選擇：為確保防漏，當離心速度高于10000xg或者對有害物質進行離心時，本系列30ml和50ml的離心管通常使用密封蓋或者密封蓋裝置（可另購）。

Sealing caps available for 30mL and 50mL size to assure leakproof service especially at high speeds >10,000 × g or when spinning hazardous materials(sold separately).

◆適用溫度：Withstand temperatures from -100° to +150°C (-148° to +302°F).

◆配套轉子：幾乎對應貝克曼、久保田、日立、TOMY等所有離心機的轉子。

◆符合標準：符合美國OSHA血清抗病原體標準。

◆滅菌操作：在進行高溫高壓滅菌操作之前，將蓋子放置在離心管上，但不要按螺紋旋轉密封。

Before autoclaving, just set closure on top of the tube without engaging the threads.

◆預測試：在20000RCF以上使用時，一定要預先測試離心管。

◆關鍵特點：可高溫高壓滅菌，防生物危害，防漏，氟塑料. Autoclavable/Biohazard/Leakproof/PTFE FEP.

◆注意：離心時必須100%填滿離心管的量.Must be filled to at least 100% of the total capacity.

型號選擇Ordering Information:

備注： 訂貨號為NG3114-0050離心管實際滿裝容量為42ml，為標準離心機而設計。Order No. NG3114-0050 has a brim capacity of only 42mL but is designed to fit standard rotor.